Cast Steel Pressure Seal Valves - Globe Valves

Upright Globe and Angle Valve Features

• Disc are accurately fitted and guided to minimize vibration.Seating surfaces are stellited. One piece stem and disc design are furnished on larger size valves
• Seat Ring is stellite faced, accurately fitted and seal welded in place
• Stellite faced back seat and stem guide insure tight sealing and accurate guiding of stem
• Yoke design - Studs fasten the yokearm directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has flow area that is designed for minimum turbulence and pressure drop
• Lifting lugs, on larger size valves, aid in installation and maintenance operation

Non-Return Upright Globe and Angle Valve Features:

• Non-Return valves should always be mounted in a horizontal position with the stem pointing vertically upwards so the disc is free to close by gravity yet cushioned in the dash-pot
• Discs are full floating and accurately guided. Seating surfaces are stellited
• Seat Rings are stellite faced, accurately fitted and seal welded in place
• Stellite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
• Yoke design -Studs fasten the yoke directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has flow area that is designed for minimum turbulence and pressure drop
• Lifting Lugs, on larger size valves, aid in installation and maintenance operation