Options: Sizes: 1/4" thru 3" full port and standard port In-line repairable High temperature service Abrasive slurry service Special ball and seat coatings Available in a variety of exotic alloys

Item # Part Name Qty. Required 1 Body ASTM B367 GR.C-3 2 Ball Titanium 3 End piece ASTM B367 GR.C-3 4 Seat Titanium 5 Stem Titanium 6 Stem nut 304 SS 7 Stem bushing Titanium 8 Stem seal Grafoil 9 Thrust bearing Arlon 1555 10 Stop Plate 304SS 11 Body seal Mylar reinforced grafoil 12 Handle 304 SS 13 Handle nut 18-8 SS 14 Belleville washer 17-7 Ph SS 15 Body nut ASTM A449 GR.5 NP. 16 Body bolt ASTM A449 GR.5 NP.

Cryogenic Ball Valve Features: Three (3) piece disign Full port Standard port TFE seals Blowout-proof stem Secondary metal seat Sizes; 1/4" thru 3" Pressures: vacuum to 150 PSI Ends: threaded, socketweld, buttweld & sanitary Materials: cast stainless steel & exotic alloy Standard extended bonnet "A" dimension available in 3", 4", 6" & 8" lengths. Other lengths available on request.

Extended Stem Ball Valve Features: Three (3) piece disign Full port Standard port TFE seals Blowout-proof stem Secondary metal seat Sizes; 1/4" thru 3" Pressures: vacuum to 150 PSI Ends: threaded, socketweld, buttweld & sanitary Materials: cast stainless steel & exotic alloy Standard extended bonnet "A" dimension available in 3", 4", 6" & 8" lengths. Other lengths available on request.

Firesafe Design
Minimum leakage under fire conditions - full swing out capabilities.

Chlorine Service
Cooper ball valves are available in special designs for the most exacting chlorine applications.

Vacuum service
Standard Cooper ball valves are suitable for service down to 20 microns. With special preparation, they may be used to 10-8 mm mg.

Steam Service
Rated to 300 PSIG saturated steam with Cooper's exclusive Cooperfill 133 seats and special seals.

Oxygen Service
All ball valves are available specially cleaned and prepared for oxygen service.