| |
Bonney Forge Globe Valves - Overview
Bonney Forge valves
are available in two bonnet designs.
The first design is the Bolted Bonnet,
with male-female joint, spiral wound
gasket, made in F316L/graphite. Ring
joint gasket are also available on request.
The second design is the welded bonnet,
with a threaded and seal welded joint.
On request a full penetration welded
joint is available.
Bonney
Forge globe valves conform to MSS-SP-118,
ASME B 16.34, and BS 5352. Each are
tested according to API 598, and marking
is per MSS-SP 25.
-
Full
Port or Conventional Port
-
Outside
Screw and Yoke (OS & Y)
-
Two
piece self-aligning packing gland
-
Bolted
bonnet with spiral-wound gasket or
threaded and seal welded bonnet
-
-
-
Socket weld ends to ASME B16.11
-
Screwed
Ends (NPT) to ANSI/ASME B1.20.1
Flanged
End Globe Valves
Integral Flanged End Valve Design Construction
and Specifications
Bonney Forge integral flanged end valves
conform to API 602, MSS-SP-118 (as applicable),
and ANSI B16.34. Each are tested according
to API 598, and marking is per MSS-SP-25.
-
Full Port and Conventional Port
-
Face
to face according to ANSI B16.10
-
Flanges
according to ANSI B16.5
-
Outside
Screw and Yoke (OS & Y)
-
Two
piece self-aligning packing gland
-
Bolted
bonnet with spiral-wound gasket retained
type
-
-
-
RTJ
body bonnet gasket ring joint type
|
Bonney
Forge Cryogenic Globe Valves
Bonney Forge valves are available in two bonnet
designs. The first design is the Bolted Bonnet,
with male-female joint, spiral wound gasket, made
in F316L/graphite. Ring joint gasket are also available
on request. The second design is the welded bonnet,
with a threaded and seal welded joint. On request
a full penetration welded joint is available.
The cryogenic valves are available in gate and globe
design configurations. Valves are designed with
an extended body for use in cold services to -196
degrees C (-320 degrees F).
Bonney
Forge cryogenic gate and globe valves conform to
API 602, MSS-SP-118, and BS 6364. Each are tested
according to API 598 and marking is per MSS-SP-25.
- Full
port or conventional port
- Two
piece self-aligning packing gland
- Bolted
bonnet with spiral-wound gasket or threaded
and seal welded bonnet
- Integral
backseat
- Pressure
relief hole on seat (for Gate Valves only)
- Socket
welded Ends to ASME B16.11
- Screwed
Ends (NPT) to ANSI/ASME B1.20.1
- Special
extension lengths on request
- Soft
seats for globe valves on request
- PTFG
stem packing on request
- Special
low temperature testing on request
- Outside
Screw and Yoke (OS & Y)
View 800 LB Globe
Cryogenic Specifications
View 1500 LB Globe
Cryogenic Specifications
|
|
|
Toll
Free: 1-800-447-4230
Fax: 713-462-4187
Local: (713) 462-4181
24 Hr. Pager (713) 764-2285
E-mail: valves@aivinc.com
Copyright© AIV, Inc. 2001
|
