| |
Bonney Forge Gate Valves - Overview
Bonney
Forge valves are available in two bonnet
designs. The first design is the Bolted
Bonnet, with male-female joint, spiral
wound gasket, made in F316L/graphite.
Ring joint gasket are also available on
request. The second design is the welded
bonnet, with a threaded and seal welded
joint. On request a full penetration strength
welded joint is available.
Bonney Forge gate valves
conform to API 602, BS 5352, and ASME
B 16.34. Each are tested according to
API 598, marking is per MSS SP25.
Socket Weld/Screwed End Gate Valves
- Full
Port or Conventional Port
- Outside
Screw and Yoke (OS & Y)
- Two
piece self aligning packing gland
- Bolted
bonnet with spiral-wound gasket or
threaded and seal welded bonnet
- Integral
backseat
- Socket
weld Ends to ASME B16.11
- Screwed
Ends (NPT) to ANSI/ASME B1.20.1
-
Full Port and Conventional Port
-
Face
to face according to ANSI B16.10
-
Flanges
according to ANSI B16.5
-
Outside
Screw and Yoke (OS & Y)
-
Two
piece self-aligning packing gland
-
Bolted
bonnet with spiral-wound gasket retained
type
-
-
-
RTJ
body bonnet gasket ring joint type
|
Bonney
Forge Cryogenic Gate Valves
Bonney Forge valves are available in two bonnet
designs. The first design is the Bolted Bonnet,
with male-female joint, spiral wound gasket, made
in F316L/graphite. Ring joint gasket are also available
on request. The second design is the welded bonnet,
with a threaded and seal welded joint. On request
a full penetration welded joint is available.
The cryogenic valves are available in gate and globe
design configurations. Valves are designed with
an extended body for use in cold services to -196
degrees C (-320 degrees F).
Bonney
Forge cryogenic gate and globe valves conform to
API 602, MSS-SP-118, and BS 6364. Each are tested
according to API 598 and marking is per MSS-SP-25.
- Full
port or conventional port
- Two
piece self-aligning packing gland
- Bolted
bonnet with spiral-wound gasket or threaded
and seal welded bonnet
- Integral
backseat
- Pressure
relief hole on seat (for Gate Valves only)
- Socket
welded Ends to ASME B16.11
- Screwed
Ends (NPT) to ANSI/ASME B1.20.1
- Special
extension lengths on request
- Soft
seats for globe valves on request
- PTFG
stem packing on request
- Special
low temperature testing on request
- Outside
Screw and Yoke (OS & Y)
View 800 LB Gate Cryogenic
Specifications
View 1500 LB Gate
Cryogenic Specifications
|
|
Forged
Steel Extended Body Valves
Bonney
Forge extended body gate valves are available in
two bonnet designs. The first design is the Bolted
Bonnet, with male-female joint, spiral wound gasket,
made in F316L/graphite. Ring joint gasket are also
available on request. The second design is the welded
bonnet, with a threaded and seal welded joint. On
request a full penetration strength welded joint
is available.
Bonney
Forge extended body gate valves conform to API 602.
Each are tested according to API 598 and marking
is per MSS-SP-25.
- Integral
extended end body with threaded, socket weld
or butt weld end connection
- Outside
Screw and Yoke (OS & Y)
- Two
piece self aligning packing gland
- Bolted
bonnet with spiral-wound gasket or threaded
and seal welded bonnet
- Integral
backseat
- Socket
weld ends to ASME B16.11
- Screwed
Ends (NPT) to ANSI/ASME B1.20.1
View 800 LB Extended
Body Specifications
View 1500 LB Extended
Body Specifications
View 800 LB Valvolet®
Specifications
View 1500 LB Valvolet®
Specifications
|
|
|
Toll
Free: 1-800-447-4230
Fax: 713-462-4187
Local: (713) 462-4181
24 Hr. Pager (713) 764-2285
E-mail: valves@aivinc.com
Copyright© AIV, Inc. 2001
|
